Pedrollo PKM 80 boiler fill water pump for front entry and top exit. Flow rate up to 90 L/min (5.4 m³/hr) Dynamic head up to 180m PUMP INSTALLATION AND APPLICATIONS These pumps are suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. Thanks to their reliability, the fact that they are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. RELIABLE, ECONOMICAL AND SIMPLE TO USE, THEY ARE SUITABLE FOR DOMESTIC OR INDUSTRIAL APPLICATIONS, THE AUTOMATIC DISTRIBUTION OF WATER FROM SURGE TANKS, WATERING GARDENS AND FOR BOOSTING INSUFFICIENT MAINS WATER PRESSURE*. These pumps should be installed in a covered area, protected against the weather. PERFORMANCE The various models in the PK series are designed to suit a wide range of applications, with features including: high heads achieved from low motor powers. small variations in delivery rates in the event of changes in the pressure demand; high tolerance to entrained air in the pumped liquid STRUCTURAL CHARACTERISTICS Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports (Optional BRONZE body available on 60 size models) Aluminum MOTOR BRACKET with brass insert (patented), reducing difficulties when starting the pump after long periods without use. BRASS IMPELLER, with radial peripheral blades, floating on the shaft AISI 316 stainless steel MOTOR SHAFT (AISI 416 up to 0.75 kW) MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty. INSULATION class F (B up to 0.75 kW). A thermal cutout device (motor protector) is incorporated in single phase motors. Three phase motors require an adequate external motor protector complying with current standards PROTECTION IP 44. CONSTRUCTION AND SAFETY STANDARDS: complies with EN 60 335 -1, CEI 61-150), EN60034-1), (IEC 34-1, CEI 2-3) REGISTERED MODEL SKU: J.0030 Category: Pumps
